JAMIN 133 tubular light fitting for explosive environments, Zone 2 (Gaz) or Zones 21&22 (Dusts) classified - End-caps ½ ring press-formed - Optical diffuser - Diffuser Ø133mm in polycarbonate, protected from UV, solvents, hydrocarbons and cleaning agents by a coextrusion of methacrylate - Single-piece housing with reinforced seal, silicone-free - White powder-coated mounting plate guided and lockable - Passive heat sink in aluminium - Moulded EPDM gaskets - High efficiency replaceable LED modules (IRC>80, 70 000 hours L80/B10@Tmax) - Luminous flux: 9250 lm - Colour temperature: 4000K - Light mixing chamber - Non-dimmable LED driver - Diameter: 133 mm - Total length: 1595 mm - 1 ATEX polyamide cable gland (capacity: Ø8 to 13 mm) - Connection to 3x2,5mm² detachable terminal block - 2 reinforced fixing straps in stainless steel with variable centre distance and allowing 360° orientation - Off-load opening in an explosive environment - Maintenance by removing the end cap and sliding the guided gear plate - Warranty : 8 years 24/7 use at max temp - Operating temperature: -20 °C to +35 °C - Protection: IP66/IP68/IP69K - Resistance to IK shocks: IK10 - Class I - Supply voltage: 220-240V 0/50/60Hz - Power consumption: 71 W - Luminous efficacy: 130 lm/W - Power factor > 0,95 - THD: 13,3 % - T°C with incandescent wires: 650°C - Number of luminaires on automat type B16: 19 pcs - Vibration resistance: Meets the severe application requirements of the standard EN 60598-1 (tested according to CEI 60068-2-6) - Weight: 5,5 kg - ATEX approved (Licenses INERIS 15ATEX3002X/INERIS 15ATEX0005X) - II 3G Ex ec IIC T4 Gc (Zone 2) - II 2D Ex tb IIIC T70°C Db IP66/IP68 (Zones 21&22) - IECEx approved (License IECEx INE 15.0014X) - Designed and made in France