NAPIER 133 tubular light fitting - End-caps ½ ring press-formed - Optical diffuser - Ø135 mm borosilicate-glass diffuser - External metal parts in 316L stainless steel and screws in A4 stainless steel - Single-piece housing with high mechanical and reinforced seal - White powder-coated mounting plate - Passive heat sink in aluminium - Moulded EPDM gaskets - High efficiency replaceable LED modules (IRC>80, 70 000 hours L80/B10@Tmax) - Luminous flux: 7500 lm - Colour temperature: 4000K - Light mixing chamber - Resistant LED driver 'Industry', non-dimmable - Compatible with neutral TN, TT and IT arrangements with no limitations - Diameter: 133 mm - Total length: 1287 mm - 316L stainless steel cable gland (capacity: Ø7 to 13 mm) - Connection to 3x2,5mm² detachable terminal block - 2 reinforced fixing straps in stainless steel with variable centre distance and allowing 360° orientation - Maintenance by releasing the 2 closing screws, removing the end cap and extracting the gear tray - Warranty : 8 years 24/7 use at max temp - Operating temperature: -20°C +50°C - Protection: IP66/IP68/IP69K - Resistance to IK shocks: IK07 - Class I - Supply voltage: 220-240V 50/60Hz - Power consumption: 54 W - Luminous efficacy: 137 lm/W - Resistance to overload: 320 V AC, 48 h (Supports voltage spikes < 4 kV) - Power factor > 0,95 - THD: 6,8 % - Photobiological hazard: Group 0 - T°C with incandescent wires: non-flammable - Vibration resistance: Meets the severe application requirements of the standard EN 60598-1 (tested according to CEI 60068-2-6) - Weight: 9,5 kg - Designed and made in France