CUGNOT 100 tubular light fitting - Special LED satin finish diffuser - End-caps ½ ring press-formed - Diffuser Ø100mm in polycarbonate, protected from UV, solvents, hydrocarbons and cleaning agents by a coextrusion of methacrylate - Single-piece housing with high mechanical and reinforced seal - White powder-coated mounting plate - Passive heat sink in aluminium - Moulded EPDM gaskets - High efficiency replaceable LED modules (IRC>80, 70 000 hours L80/B10@Tmax) - Luminous flux: 1850 lm - Colour temperature: 4000K - Light mixing chamber - Resistant LED driver 'Industry', non-dimmable - Compatible with neutral TN, TT and IT arrangements with no limitations - Diameter: 100 mm - Total length: 697 mm - 1 3x1,5mm² disconnectable plug lockable with threaded ring (capacity: Ø8 to 11 mm) - Connection with disconnectable plug 3x1,5mm² - 2 reinforced fixing straps in stainless steel with variable centre distance and allowing 360° orientation - Maintenance by releasing the 2 closing screws, removing the end cap and extracting the gear tray - Warranty : 8 years 24/7 use at max temp - Operating temperature: -20°C +50°C - Protection: IP66/IP68/IP69K - Resistance to IK shocks: IK10 - Class I - Supply voltage: 220-240V 50/60Hz - Power consumption: 16 W - Luminous efficacy: 116 lm/W - Resistance to overload: 320 V AC, 48 h (Supports voltage spikes < 4 kV) - Power factor > 0,9 - THD: 8,5 % - Photobiological hazard: Group 0 - T°C with incandescent wires: 650°C - Number of luminaires on automat type B16: 32 pcs - Vibration resistance: Meets the severe application requirements of the standard EN 60598-1 (tested according to CEI 60068-2-6) - Weight: 2,1 kg - Designed and made in France